EasyManua.ls Logo

Nemaxx M1-Mini - Maintenance and Cleaning

Nemaxx M1-Mini
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version: 5.0
20.01.2017
6
EN
CAUTION
Before using the alarm silence (mute), identify the source of the smoke and be
certain you are safe.
DANGER
If the alarm sounds, and it is not being tested, it means the unit is sensing smoke,
THE SOUND OF THE ALARM REQUIRES YOUR IMMEDIATE ATTENTION AND
ACTION.
WARNING
The battery is sealed inside the cover and not replaceable.
Please replace the alarm if the low battery signal occurs.
IMPORTANT
Do not attempt to remove the cover to clean inside. This will a󰀨ect warranty.
MAINTENANCE AND CLEANING
In addition to weekly testing, the alarm requires periodic cleaning to remove dust, dirt, and
debris.
Clean the alarm at least once a month to remove dust, dirt, or debris.
Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm
device.
This alarm has a low battery monitor which will cause the alarm to „beep“ approx. every
40 seconds and the red LED ashes once at the same time for a minimum of thirty days
when the battery is low.
If there is a defective battery or other failures, you can refer to ‚ „Trouble shooting“ for a
solution.
CAUTION
Do not attempt to repair the alarm. lt will a󰀨ect your warranty.
Pack it in a well-padded carton, and ship to the original place you buy.
REPAIR

Related product manuals