Operating the energizer with a Nemtek key-chain remote is the same as for operating the
energizer without a remote, except that, if the energizer has been locked, then at power on,
the Nemtek key-chain remote will have to be presented to the energizer before it begins
operating.
To present a remote to the energizer, perform these following steps;
• Turn the Nemtek key-chain remote on as discussed in the previous section.
• Be sure you have activated the menu and not the torch.
• Hold the remote such that the symbol near the top right of the remote is over the
Nemtek logo on the front of the energizer (see drawing on page 13).
• Keep the remote in place for a second or two, after which you should hear a short
beep from the energizer indicating successful completion of a transaction. If instead a
long beep is heard, then the energizer has been locked with a different pin to that
contained in the remote you are using. If no beep sound is heard, slowly move the
remote over the face of the energizer in the vicinity of the Nemtek logo.
• On hearing the beep, you can move the remote away from the energizer and a new
energizer menu will appear on the display of the remote, through which you can start
navigating.
The energizer menu:
Menu Lower Upper Factory Description
item limit limit default
Supply - - - Battery/mains supply voltage
information
Fence - - - Present fence operating voltage
information
Effort - - - Energizer effort or capacity being
used, at present, to drive the fence
at the set voltage.
Set Off / 2 kV 10 kV 8 kV Fence day light set point voltage
Rate 1 second 4 second 1.5 second Fence day light set pulse rate
Set Off / 2 kV 10 kV 8 kV Fence night set point voltage
Rate 1 second 4 second 1.5 second Fence night set pulse rate
Warn at 60% 95% 95% Energizer effort threshold at which
the high intensity
warning light
begins to double flash
Control - - APT Fence voltage Conventional or
Adaptive control method
Locked - - No Nemtek energizer security lock
function enable or disable
V min - - - Lowest recorded fence voltage
(reset after remote presentation)
% max - - - Highest recorded fence effort
(reset after remote presentation)
AGRI
To Next Page
Loading...