Nemtek MERLIN STEALTH - SIREN ON-TIME SETTINGS; ALARM OFF-TIME SETTINGS; ALARM EVENT LIMIT FOR RE-ARM

5
MERLIN STEALTH Installer Options
SIREN-ON TIME
The time that the siren will be on for, can be changed by pressing
the 0 key, followed by the 1 key. Select the desired time from the table and press the
corresponding number from 0 to 9 followed by
the # key. The keypad will beep three times to indicate that the new setting
was accepted.
Example: To change the Siren-On Time to 4 minutes,
enter 0 1 8 #
ALARM-OFF TIME
The time for all alarm events to be ignored after the Siren-On Time has elapsed, can be changed
by pressing the 0 key followed by the 2 key. Select the desired time from the table and press
the corresponding number from 0 to 9 followed by the # key. The keypad will beep three times
to indicate that the new setting was accepted.
Example: To change the Siren-Off Time to 2 minutes,
enter 0 2 6 #
NUMBER OF ALARM EVENTS BEFORE RE-
ARM
The number of alarm events that are allowed before the RE-ARM timer becomes active. This can
be changed by pressing the 0 key, followed by the 3 key. Select the desired number of times
from the table and press the corresponding number from 0 to 9 followed by the # key. The
keypad will beep three times to indicate that the new setting was accepted.
0 2 Sec
1 5 Sec
2 10 Sec
3 30 Sec
4 45 Sec
5 1 Min
6 2 Min
7 3 Min
8 4 Min
9 4 min 30 sec
0 2 Sec
1 5 Sec
2 10 Sec
3 30 Sec
4 45 Sec
5 1 Min
6 2 Min
7 3 Min
8 4 Min
9 4 min 30 sec