To Next Page

To Previous Page

BASIC OPERATIONS

First time, before using the camera:

A. Insert micro SD card. Without a card, the green indicator flashes.

The camera is compatible with high speed micro SD card (class 4 or higher).

B. Insert battery into the camera (Through the door in the bottom of the camera ).

C. Turn on/off

Press and hold the POWER button for 3 seconds and release, after a while you will see the startup

screen and the green indicator light will come on.

Long press the POWER button for 3 seconds, your camera will be off.

In the standby mode, the red indicator is off.

Questions and Answers:

Need help?

Do you have a question about the NEO Adventure and is the answer not in the manual?

NEO Adventure Specifications

General