4. CONTROL MENU
Meaning of the icon in menu
Default setting shadowed. mark with 1 can be basic
reloaded, 2 be program reloaded, 3 can be private
reloaded.
Step three: Install the whole device onto
appropriate truss and fasten the clamps, tight
the safety rope with the truss or other xing
point at a suitable position that drop down
distance not exceed 20 cm.
Connect Light Infomation Set Program
Menu tree
English version
Mode
Addr XXX DMX address setting
Slav Choose Slave mode
Sequ Alon/Mast Choose Sequence mode
Sund Alon/Mast Choose Sound mode
Lamp
Temp 80~139°C, 80°F Lamp o if temperature continuously over
for 5 minutes
Adju CHxx=XXX….. Adjust value of each channels
Info DriT XXXC Temperature of driver
To Next Page
Loading...
Need help?
General
