NEO Spring - Filter Replacement Cycle; Problem Analysis and Solutions

Installation
1.Closemainwatersupplyvalvetoseparatethefaucet.
2.WindtheTeontapeontheadaptorandtittothepipe.
Do not turn the water pipe.
3.Connectthefaucetwiththeadaptor.
Shall install the adaptor with connector on the cold water
pipe.
4.Connect1/4inchwhitetubingwiththeconnectoronthe
adaptor.
Flush water through each lter at least 5 minutes before
Connecon.
Packing List
RO machine 1set
TFC RO membrane 1piece
Accessory BallValve,GateValve,Spanner,TeonTape
Tubing (1/4”) 5 m
Warranty Card 1nos.
Manual 1piece
Pre Filter Housing Set 1piece
6