How it Works
The Smart Splitter functions by monitoring the total power coming from both
outlets and shutting off the Secondary side when the power draw exceeds the
limit of your circuit. Once the Primary side finishes drawing power, the Splitter
will automatically switch back to the Secondary side if it is still attempting to
draw power.
The Primary outlet will always allow for a minimal amount of power that is
necessary to power LED screens, even when the Secondary is active. This “idle
mode” allows you to interact with and turn on the Primary device which will
then completely shut off the Secondary.
Due to the completely automated switching functionality, there is no
remote for the Smart Splitter.
smart splitter user manual 04
APPLIANCE AUTO-SWITCHING
Appliance starts, EV charging
automatically pauses
Ev is charging When appliance finishes,
EV charging resumes
DUAL EV AUTO-SWITCHING
Primary EV is charging, Secondary outlet is
shut off
Primary EV completes charging
session, power switches to Secondary
To Next Page
Loading...