05 smart splitter user manual
Cautionary Advice
Only use your Smart Splitter within the specified operating parameters.
Do not set your EV charging amperage:
>40 Amps on a 50A breake
>24 Amps on a 30A breaker
Do not use (or discontinue using) the NeoCharge if it is defective,
appears cracked, frayed, broken or otherwise damaged, or fails to
operate.
Do not use the NeoCharge in any outlet for which it is not designed.
Do not attempt to open, disassemble, repair, tamper with, or modify
your Smart Splitter. Your device is not able to be serviced by the user.
Please contact NeoCharge Support for any repairs.
Do not disconnect your Smart Splitter when it is supplying power to
either output.
Do not plug the NeoCharge into a damaged, loose or worn power outlet.
Ensure that the prongs on your device fit snuggly into your wall outlet.
Do not expose your unit to flammable or harsh chemicals or vapors.
Do not use or store your device in a recessed area or below floor
level. When using your Smart Splitter indoors, ensure that the device
is positioned at least 18 inches (46 cm) above the floor.
To Next Page
Loading...