smart splitter user manual 06
Avoid and prevent your Smart Splitter from foreign objects as well as
moisture and water at all times. If any sort of corrosion or damage is
suspected discontinue use immediately. If rain falls during charging, do
not allow rain water to run along the length of the charge cable plugged
into your device.
Do not plug your Smart Splitter into an electrical outlet that is
submerged in water or covered in snow. In the event of this situation,
turn off your breaker and then unplug your device.
Do not touch the Smart Splitter's end terminals with sharp metallic
objects such as wire, tools or needles. Do not insert any foreign objects
into any part of your device. Avoid the use of cleaning solvents with
your device.
Do not use private power generation as a source for charging.
Do not operate your Smart Splitter in temperatures outside of its
operating range of -22º F to 122º F (-30º C to 50º C).
Store your device in a clean and dry place inside the temperatures of
-40º F to 185º F (-40º C to 85º C).
To Next Page
Loading...