08. The RLU score
will display along with
a symbol for pass,
marginal or fail.
English
01. To power on the reader, press and hold the
center button on your AccuPoint Advanced Next Gen.
Enter user name and password if required.
02. Select Standard Test (when using a site plan)
or Quick Test for general sampling. Under standard
testing, select the correct site to be tested.
04. Hold the sampler
vertically and fully
depress to activate.
Note: the sampler must be
held vertically.
05. Mix gently
for two seconds.
NOTE: do not shake.
06. With the instrument
held upright, press the
eject button and insert
the sampler.
07. Depress the
sampler all the way
down and close
the door.
Note: keep instrument
upright while the sample
is being read.
09. On the results
screen, users have the
option to enter notes for
that result, retest that site,
or move to the next site in
their plan.
2:15 PM 8/1/20
RESULT PASS:0
USER <Guest>
TIME 2:14 PM 8/1/20
PLAN TEST
AREA PROCESSING
GROUP LINE 1
SITE CONVEYOR BELT 1
<Guest>
Notes*
Retest
Next Site
Sampling Quick Reference Guide (AccuPoint Advanced Next Gen Reader) - Surface Samplers
03. Sample your site
by “drawing” a 4” x 4”
square. With a vertical
and horizontal back-
and-forth motion
“fill” in the square.
Consistency
is critical.
To Next Page
Loading...
Need help?
General