NEOHIPO AM02 User Manual (English)

Courtney DickersonJul 27, 2025

Why is there no sound coming from my NEOHIPO AM02?

B
Bryan AdkinsJul 27, 2025
There could be several reasons for the lack of sound from your NEOHIPO Amplifier. First, ensure that all sound source and speaker connections are properly connected. Next, verify that the volume control is not set to the minimum position and adjust it accordingly. Also, check that the impedance of the speakers connected to the amplifier is between 4 and 8 ?. Finally, if the amplifier has been running for a while, it may have switched off due to overheating. In this case, turn the amplifier off, allow it to cool down with proper ventilation, and then turn it back on.

NEOHIPO AM02 Specifications

General

Device Name:	Bluetooth 2.0 CH Amplifier
Included In The Packaging:	AM021 、Remote Control1、 User Manual 1、 power cable1
Input Mode:	RCA\BT\FM\USB\ TF CARD\MIC
Max Output Power:	300W
Frequency Range:	20Hz-20KHz (+/-3dB)
THD:	≤ 0.1%
SNR:	≥ 85dB
Rms:	15W*2
Recommended speaker Power:	50-80W
Recommended speaker Impedance:	4-8 Ω
power Adapter:	AC 110V-240V
DC Input :	DC 12V
Bluetooth Range:	Up to 10m

Weight and Dimensions

Dimensions:	25316370mm

NEOHIPO AM02 User Manual