3
DVR connection
Wi-Fi APP page: https://info.neoline.com/flash2k/eu
1. Download the App.
2. Turn on the dashcam.
3. Connect to a Wi-Fi network with a smartphone:
SSID: Neoline_Connect_XXXX
Default password: 12345678
4. Activate the app on your smartphone.
Recording mode
Loop recording mode (enabled by default) is designed to create video files of a
certain length. When there is no more space on the memory card, the device
automatically replaces the oldest video file with the newest one, exception: files
that are protected from deletion.
Operating Conditions
Please read the warranty conditions carefully. If the appliance is not working
properly, please try to update the software (firmware) before contacting your
service centre/seler or any other authorised organisation. You can download
the latest version of the software at http://neoline.com/update/. You can find the
update instructions at the address above. If you have any difficulties with the
software update process, please contact Customer Service at the phone
numbers listed on the company's website. Customer Support Service:
http://neoline.com/update/
• Never insert or remove a memory card when the DVR is turned on. This can
damage the device and the recorded video files.
• Use only high-quality microSD cards of at least Class 10 with UHS-I…UHS-III
connectivity to avoid recording failures and playback delays. At least 16GB, at
Emergency recording is activated automatically when the G-sensor is triggered
(sudden acceleration/deceleration) or in the event of a collision. The
emergency record is automatically locked to prevent deletion during loop
recording. Overwrite-protected files are stored on the memory card in the
EVENT folder.
To Next Page
Loading...
