EasyManua.ls Logo

Neoline G-TECH X36 - Alert Settings Configuration

Neoline G-TECH X36
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
18
Traffic control camera alert settings
• Radar Alert: Off/On
• Volume: Loud/Medium/Quiet/Very quiet
Alert Type: Voice+Display / Voice Only / Display Only
• Alert Range: Auto/200m/300m/400m/500m/600m/700m/800m/900m
• Permissible excess (km/h): Off/-10/-5/-3-/0/+2/+5/+10/+15/+20
• Permissible excess - exceeding the speed limit in the area below which the device does
not notify about speeding).
Example A:
- section limit: 60 km/h
- additional overshoot: Off
In this case, the device will start a speeding alert when the speed reaches 61 km/h.
Example B:
- section limit: 60 km/h
- additional excess: 10 km/h
In this case, the device will start the overspeed alert when the speed reaches 71 km/h.)
• Speed limit (km/h): Off / 10 to 130 in 10 increments.
(if the set value is exceeded, the device will start notifying about speeding)
• Limitation: Off/10km/h up to 130 km/h in steps of 10
• Police posts: On/Off
• Fake: On/Off
• Database: indicates the date of the last update.
• Demo mode: demonstrates an example of the device's operation with the selected
settings of the traffic control camera notification function. Be sure to disable this feature
after checking the device.

Table of Contents

Related product manuals