18
Updating Firmware
1) Download the rmware le at www.neoline.com and extract the le from the
archive.
2) Format the memory card and transfer the extracted le to the microSD memory
card.
3) Insert the memory card with the downloaded le into the DVR slot.
4) Connect the device to a power source and turn it on.
5) The indicator light will ash while the rmware le is being downloaded to the
device.
6) Upon completion of the process, the device will reboot automatically.
7) Check in the settings menu if the correct rmware version is displayed.
8) Format the memory card with the DVR menu. ATTENTION! If the memory card is
not formatted after the update, the update process will be started again the next
time it is turned on.
ATTENTION! Do not turn o the DVR power during the rmware update.
7. Possible problems and their causes
This section helps you to eliminate problems the device may have under normal
operation.
- Failure to photograph/record video.
Check if there is enough free space on the microSD card and if it is not blocked.
- Spontaneous stop at recording.
Too many video les stored. Only use at least class 10 high-speed microSD cards by
proven manufacturers.
- When you try to view a photo/play a video le, the “wrong le” message
appears.
File writing failure due to microSD card le system error. Format the microSD card.
To Next Page
