Neoline G-Tech X74 - Page 20

20
Notication of nearby trac control cameras
• Radar notication: O/On
• Volume: High/Avg/Low/Lowest
• Notication type: Voice + Text/ Voice/Text
• Notication distance: Auto/200m/300m/400m/500m/600m/700m/800m/900m
• Speed limit tolerance (km/h): O/ -10/-5/-3-/0/+2/+5/+10/+15/+20
(See examples below).
Example A:
- Section speed limit: 60 kph
- Tolerance: O
In this case, a speed alert is given at 61 km/h.
Example B:
- Section speed limit: 60 kph
- Tolerance: 10 km/h
In this case, a speed alert is given at 71 km/h.
• Speed limit (kmph) O/10...180 (step = 10)
(if the set value is exceeded, a speeding message is given)
• Trac control posts: O/On
• Fakes: O/On
• Switch: O/On
• Hide: O/On
• Database: Information on the camera/radar database version.
• Demo Mode: O/On (Demo Mode is to demonstrate notication of nearby trac
control cameras)