OPERATING INSTRUCTIONS continued
MODE: The default setting is NORMAL. Press the mode button to select your
requirement. The sequence is as follows:-
NORMAL – NATURAL – SLEEP
The corresponding LED will illuminate with each selection.
NORMAL MODE: The unit will operate at the selected fan speed setting
NATURAL MODE: The fan speed will alternate between settings to simulate a
natural breeze.
SLEEP MODE: The fan speed will reduce from HIGH to MEDIUM to LOW over a
period of ninety minutes to help aid restful sleep.
COOL BUTTON: Before operating the appliance in cool mode, ensure the water
tank is filled with sufficient water and securely located in the appliance. Observe
the water level indicator on the front panel to prevent over or under filling.
NOTE: The cool LED will flash if there is no or insufficient water in the tank.
With the correct amount of water in the tank, press the COOL button and the
corresponding LED will illuminate.
Additional cooling can be achieved by adding ice to the ice basket or the freezer
ice block can be placed directly into the water tank.
The MODE operation DOES NOT work with the WARM function.
4
To Next Page
Loading...