To Next PageTo Next PageWhat to do if my Neptun Blue Line NPGP 5500 Water Pump motor fails to start up?
If the Neptun Water Pump motor fails to start, it could be due to a couple of reasons. First, check that there is mains voltage present. Second, the pump rotor might be blocked. If blocked, dismantle and clean the pump to resolve this.
Why is the delivery rate inadequate in my Neptun Blue Line NPGP 5500?
If your Neptun Water Pump has an inadequate delivery rate, several factors could be the cause. The suction height might be too high, so check and adjust it. The coarse filter could be dirty, requiring a cleaning. If the water level is falling rapidly, place the suction hose at a deeper level. Also, contaminants might diminish the pump's performance, in which case you should clean the pump and replace any worn parts.
What to do if the thermostat switches my Neptun Blue Line NPGP 5500 off?
If the thermostat switches off your Neptun Water Pump, it's likely due to the motor being overloaded. This could be because of foreign substances causing friction. To fix this, dismantle and clean the pump, and make sure to prevent the intake of foreign substances by using a filter.
Why does my Neptun Blue Line NPGP 5500 have no intake?
If your Neptun Water Pump has no intake, several issues might be at fault. The non-return valve could be dirty and needs cleaning. The pump chamber might lack a water connection, so fill water into the intake. There might be air in the intake line, so ensure the intake line is airtight. Also, the maximum suction height might be exceeded, so check the suction height.
Instructions to read and adhere to safety information before initial operation.
Identification of all parts of the garden pump as shown in Figure 1.
List of all components included in the packaging with the garden pump.
General safety advice and precautions to prevent injuries and damage during use.
Regulations for electrical connections and safe use in water bodies.
Details the intended applications for the garden pump, such as irrigation and watering.
Specifies the types of fluids suitable for pumping, including clear water and rainwater.
Instructions for installing the water particle filter onto the garden pump.
Guidance on connecting the intake hose or pipe, including diameter and positioning.
Instructions for connecting the discharge line, specifying minimum diameter and couplings.
Details on connecting the pump to the power supply and safety requirements.
Basic servicing instructions to ensure proper functioning and longevity of the pump.
Instructions for cleaning the filter element, including cleaning agents and drying.
Information on what details to provide when ordering spare parts for the pump.
Lists the technical standards and directives the product conforms to.
Information regarding the disposal of electrical and electronic equipment within the EU.
Reprinting or reproduction of documentation requires express consent from ISC GmbH.
Note that technical changes and modifications are reserved by the manufacturer.
Details the terms and conditions of the guarantee, including statutory rights.
Specifies what is covered by the guarantee and lists exclusions like commercial use or transport damage.
Outlines the guarantee period, claim submission timeline, and conditions for repairs or replacements.
Procedure for sending defective devices and required documentation for warranty claims.
Section for the customer to provide their personal contact and address details.
Space to detail the specific fault or malfunction encountered with the device.
Fields to indicate warranty status and provide purchase receipt number and date.
General| Brand | Neptun |
|---|---|
| Model | Blue Line NPGP 5500 |
| Category | Water Pump |
| Language | English |
