Neptune Systems EnergyBar 832 - Outlet and DC24;ACC Status LEDs

EnergyBar 832 - User Guide Page 8
Not Lit
The EnergyBar 832 has no AC input power or AquaBus power from
other EnergyBars
Solid Orange
The EnergyBar 832 is operating normally and is communicating
with the Apex base unit
Flashing Orange (rapid)
The EnergyBar 832 is in bootloader mode and is attempting to
communicate with an Apex base unit
Blinking Orange (slow)
The EnergyBar 832 is in Fallback mode
ENERGYBAR 832 OUTLET STATUS LEDS
LEDs numbered 1 through 8 indicate the state of the corresponding 120VAC outlet.
Not Lit
The AC outlet is OFF
Solid Orange
The AC outlet is ON
Flashing Orange
(rapid)
The AC outlet is ON and the load on that outlet exceeds 7 Amps;
this indicates an overcurrent condition which must be addressed
immediately.
The LEDs labeled A and B indicate the state of the corresponding DC24/ACC output.
Not Lit
The DC24/ACC output is OFF
Solid Orange
The DC24/ACC output is ON