The Nerf Blaster Scooter 2.0 (Item # NF3313B) is a unique ride-on toy designed for children aged 8 and up, combining the fun of a scooter with the excitement of a Nerf blaster. This innovative device allows users to ride and blast Nerf darts simultaneously, offering an engaging and active play experience. The scooter is built to support a maximum weight of 185 lbs (38 kg), ensuring durability and stability for its target age group.

Function Description

The core function of the Nerf Blaster Scooter 2.0 is to provide a dual-purpose play experience: scooting and dart blasting. The scooter features a sturdy deck, two wheels, and a brake for safe and controlled riding. The stem is adjustable, allowing for three different riding heights (33", 35", and 37") to accommodate children of various sizes. This adjustability ensures a comfortable and ergonomic fit for the rider.

Integrated into the scooter's design is a Nerf blaster, which is powered by four 1.5V AA/LR6 batteries (not included). The blaster is located on the stem and can be adjusted to different angles, including a 90-degree position for blasting while riding or a closed 0-degree position for fast riding and storage. The blaster uses official Nerf darts, which are loaded into quick-reload clips. Each clip can hold up to 6 darts.

To operate the blaster, the user presses and holds a trigger button. This engages the motors, and darts are blasted in a rapid-fire mode as long as the button is held down. A jam clearing door is incorporated into the blaster's design, allowing users to easily remove any jammed darts. The blaster will not function if this door is not fully closed, a safety feature to prevent accidental firing during maintenance.

The scooter's design emphasizes user interaction and dynamic play. Children can propel themselves using their feet, similar to a traditional kick scooter, while simultaneously engaging in dart battles. This combination encourages physical activity, coordination, and imaginative play.

Usage Features

The Nerf Blaster Scooter 2.0 is designed with several user-friendly features to enhance the play experience and ensure safety.

Assembly: The scooter requires some assembly. Key steps include:

Stem Lock: Releasing the deck clamp and pushing up the deck lever to lock the stem into a vertical position. The deck clamp then needs to be tightened to secure the stem.
Blaster and Stem Insertion: Inserting the blaster and stem into the down stem of the scooter. The stem clamp is then slid down over the seam where the two stems meet and tightened with a screwdriver.
Hand Grip Installation: Sliding the hand grip over the shaft and snapping it into place using the lock button.
Blaster Angle Adjustment: Using the blaster angle release button to adjust the blaster to a 90-degree angle for blasting or a 0-degree position for riding and storage.
Clip Insertion: Inserting the quick-reload clip into the bottom of the blaster, ensuring it's in the correct direction as indicated on the clip.

Battery Installation: The blaster requires four 1.5V AA/LR6 batteries. The battery cover is located on the right side of the blaster and is secured with a screw. Users must unscrew the cover, insert the batteries according to the polarity markings, and then re-secure the cover.

Riding Height Adjustment: The scooter offers three riding heights (33", 35", 37"). To adjust the height, users utilize the stem clamp and quick-release snap buttons on the stem. This allows for customization based on the rider's height for optimal comfort and control.

Dart Loading and Firing: Darts are loaded into quick-reload clips, with each clip holding up to 6 darts. Darts must be inserted in the direction indicated on the clip. Once loaded, the clip is inserted into the main blaster unit, ensuring the arrow on the clip points away from the trigger. To fire, the trigger button is pressed and held until the motors engage and darts are blasted. Pressing and holding the button enables rapid-fire mode. Clip release buttons allow for easy removal of clips for reloading or storage.

Safety Precautions: The manual emphasizes several safety guidelines:

Eye Protection: Do not aim at eyes or face. Eyewear is recommended for players and bystanders.
Official Darts: Use only official Nerf darts to ensure safety standards are met. Do not modify darts or the blaster.
Protective Equipment: Always wear a helmet, wrist, elbow, and knee pads, as well as shoes with rubber soles.
Riding Environment: Avoid steep hills, roads, paths with motor vehicle traffic, wet, oily, sandy, dirty, icy, rough, or uneven surfaces.
Speed Limit: Do not exceed 6 mph.
Brake Usage: The brake pad can become hot; avoid prolonged contact.
One Rider: Only one child should ride the scooter at a time.
Time of Day: Do not ride at dusk or night.
Adult Supervision: Parental or adult supervision is strongly recommended, especially for initial adjustments like unfolding, handlebar adjustment, and folding.
Traffic Laws: Obey all local traffic and scooter riding laws and regulations.
Pedestrians: Watch out for pedestrians.

Storage: For storage, it is recommended to unload all darts from the blaster and remove batteries if storing for an extended period. The blaster should be in the closed, 180-degree position.

Maintenance Features

Proper maintenance is crucial for the longevity and safe operation of the Nerf Blaster Scooter 2.0. The manual outlines several key maintenance checks and practices:

Pre-Ride Checks: Before each use, users should:

Tightness Check: Ensure all parts are sufficiently tightened, the handlebar is securely fixed, and the footplate is securely fastened. All nuts and bolts should be checked for tightness, as they may loosen over time.
Wheel Check: Verify that both wheels can spin smoothly and show no signs of wear. Worn wheels should be replaced by contacting the manufacturer (Flybar, Inc.).

Cleaning:

Cleaning Agents: Do not use wet cloths, alcohol, industrial cleaners, or solvents to clean the scooter. These can cause loss of gloss, remove decals, or dissolve materials.
Recommended Cleaning: The manual implies a dry cleaning method or a gentle wipe with a dry cloth, though specific instructions are not provided beyond what to avoid.

Battery Care:

Leakage Prevention: Always follow instructions for battery insertion, matching polarity markings (+ and -).
Battery Mixing: Do not mix old and new batteries, or standard (carbon-zinc) with alkaline batteries.
Removal: Remove exhausted or dead batteries from the product. Remove batteries if the product will not be used for a long time.
Short-Circuiting: Do not short-circuit the supply terminals.
Rechargeable Batteries: If using rechargeable batteries, do not mix them with other types. Always remove them from the product before recharging and ensure recharging is done under adult supervision. Do not recharge non-rechargeable batteries.

Corrosion Prevention: Some metal parts may corrode over time, especially if used near the sea or left outdoors frequently. Regular inspection and appropriate storage can help mitigate this.

Modifications: Do not make any modifications to the Nerf Blaster Scooter or use attachments not included with the scooter. This ensures the product remains safe and functions as intended by the manufacturer.

Screw Securing: The manual notes that repeatedly undoing axle screws can reduce the effectiveness of factory-applied screw securing products. In such cases, a conventional screw securing product should always be used to prevent screws from coming loose.

Jam Clearing: In case of a dart jam, the jam clearing door on the blaster should be opened to remove the jammed darts, and then securely closed before resuming play.

By following these usage and maintenance guidelines, users can ensure a safe, enjoyable, and long-lasting experience with the Nerf Blaster Scooter 2.0.

Nerf BLASTER SCOOTER 2.0 - Page 11

Table of Contents

Related product manuals