Nerf BLASTER SCOOTER 2.0 - Scooter Height Adjustment; Adjusting Riding Height; Blaster Operation and Maintenance; Clearing Dart Jams

HOW TO ADJUST THE HEIGHT
Use the stem clamp and the
quick release snap buttons
on stem to adjust riding
height.
37”
35”
33”
3 RIDING HEIGHTS
Stem
clamp
Stem
snap
buttons
CLEARING JAMS
STORING YOUR BLASTER
CHECK BARREL AREA FOR A JAMMED DART.
• Open the jam clearing door and remove any
jammed darts.
• Close jam clearing door.
NOTE: Blaster will not function unless jam
clearing door is fully closed.
NOTE: Do not store blaster ready to re. Be sure to unload DARTS from blaster
before putting it away. Remove batteries if storing Blaster Scooter for an extended
period of time. For storing it is recommend that blaster be in the closed, 180
degree position.
Nerf_blaster_scooter_2_manual.indd 6Nerf_blaster_scooter_2_manual.indd 6 5/9/22 11:48 AM5/9/22 11:48 AM