7
Push selection lever to the "HOT" position. Machine
descales in start-stop operationfor approximately 2
minutes. Lever comes back to the middle position.
8
Push selection lever to the "COLD" position. Machine
descales continuously. Lever comes back to the middle
position.
9
For a better effect ofthe descaler, the machine enters a
waiting time of 2 minutes. Bar display lights vanish
progressively.
10
Empty and clean container. Rinse and clean water tank. Use
a clean food-safe brush and washing-up liquid as needed.
Afterwards refill with fresh drinking water and insert itinto
machine.
11
Push selection lever to the "HOT" position. Wait until the
lever moves to the "STOP" position. Water flow stops.
12
Push selection lever to the "COLD" position. Wait until the
lever moves to the "STOP" position. Water flow stops.
13
Remove container. Empty and clean container. Pull out
capsule holder. Remove rinsing tool. Keep itin a safe place
for later cleaning or descaling. Rinse capsule holder with
freshdrinking water from both sides. Reinsert capsule
holder.
14
Clean machine with a soft dampcloth. Dry it afterwards
with a soft dry cloth. Place drip grid on drip tray. Then
insert drip tray at desired position.
14
8. DESCALING AT LEAST EVERY 3–4 MONTHS
To Next Page
Loading...
Need help?
General
