Move lever to the right for hot water rinsing.
Bar display begins to count down.
Wait until machine stop, bar display and
power button start blinking green.
Wait until machine switches back to normal
operation. Then switch o machine.
Remove and empty capsule bin.
Empty capsule bin.
Fill water tank with fresh, drinking water up to
max. level.
Rinse and clean water tank. Afterwards rell
with fresh, drinking water and insert it into
machine.
Move lever to the left for cold water rinsing. Bar
display begins to count down. At end of rins-
ing cycle power button lights up red and bar
display counts up.
Place drip grid on drip tray. Then insert drip
tray at desired position of machine. Clean ma-
chine with a soft damp cloth. Dry it afterwards
with a soft dry cloth.
Follow instructions on descaling kit
user manual.
Avoid contact of descaling liquid
with any part of the machine.
Do not use vinegar for descaling. Do not push power button during
descaling cycle.
To Next Page
Loading...
