1
4
7
2
5
8 9
3
30 sec
ON
6
Rinse water tank at rst.
Fill water tank with fresh, drinking water and
insert water tank into machine.
Start rinsing with cold water:
Push the lever up to set the bar display to
maximum level. Move lever to the left for cold
water rinsing.
Machine starts rinsing.
Wait until countdown is nished and machine
stops.
Open locking handle and insert empty capsule
holder. Close locking handle.
Place capsule bin under coee outlet.
Connect power plug to mains power socket.
Machine starts rinsing.
Wait until countdown is nished and machine
stops.
Empty capsule bin and rell water tank with
fresh, drinking water.
Remove protection foil from drip grid. Place
drip grid on drip tray. Then attach drip tray at
desired position on machine.
Switch machine on. While machine is heat-
ing up, power button starts blinking red. After
approx. 30 seconds, power button light turns
steady green and machine is ready.
Continue rinsing with hot water:
Push the lever up to set the bar display to
maximum level. Move lever to the right for hot
water rinsing.
To Next Page
Loading...
