9
EMPTYING THE SYSTEM before a period of non-use, for frost protection or before a repair
PROGRAMMING THE WATER VOLUME RESET TO FACTORY SETTINGS
To note, the machine remains blocked
for 10 minutes after emptying! Remove
the water tank.
Place a container under the coee
outlet.
Machines turns to O mode automati-
cally when empty.
Press and hold the Espresso & Lungo
controls together for at least 4 sec. The
other control ashes for conrmation.
Factory settings are:
1. Lungo, Espresso, Ristretto controls
110 ml / 3.7 oz, 40 ml / 1.35 oz.,
25 ml / 0.84 oz.
2. Automatic O mode after
9 minutes.
3. Most frequently chosen cup size
as Espresso control at 40 ml /
1.35 oz.
Touch and hold the control while closing
the slider. Release control when desired
volume is reached. The other 2 controls
ash for conrmation. Water volume
level is now stored in the control used
during programming.
Any control can be programmed.
Completely open the slider and insert a
Nespresso
capsule.
1
2
11
12 13
1
2
3
11 12
11
>4 sec
Power OFF
Open slider. Press and hold the Ristretto
& Lungo controls together for at least
6 sec. The other control ash for con-
rmation. Then close the slider to start
procedure.
1
2
3
6 sec
To Next Page
Loading...
