Need help?Do you have a question about the Nespresso CITIZ C110 and is the answer not in the manual?
General| Brand | Nespresso |
|---|---|
| Model | CITIZ C110 |
| Category | Coffee machine |
| Language | English |
Place the coffee maker on a surface resistant to water, coffee, descaler, or other fluids.
Remove the plastic film from the machine and set it aside briefly.
Fill the water tank with drinking water.
Place an empty container under the spout.
Plug the machine into the mains and switch it on.
The machine is heating up.
The machine is ready for use.
Rinse the machine by running water through it six times.
Fill the water tank with drinking water.
Switch the machine on.
While heating, you can pre-select your coffee. See COFFEE PREPARATION.
The machine is heating up.
The machine is ready for use.
Preheated cups keep your coffee warmer for longer.
Place a cup under the spout.
Open and close the lever to eject a used capsule.
Press a button and let water run through the machine.
Empty the cup.
Never use deformed capsules as damage is possible.
Place a cup under the spout.
Insert a capsule and close the lever.
Press the Espresso or Lungo button to start brewing.
The coffee flow speed varies by coffee type.
Eject the used capsule into the container by lifting the lever.
Insert capsule and close the lever.
Press and hold the desired button.
Release the button when the desired volume is reached.
Switch the machine off.
Press and hold the Lungo button, then switch on the machine.
Release the Lungo button to reset volumes.
Risk of electric shock and fire. Never immerse in water.
Use only a damp cloth and mild cleaning agent. Do not use dishwasher.
Clean the appliance with a damp cloth.
Eject the capsule into the container.
Empty the capsule container and drip tray.
Fill the water tank with descaler solution and water.
Place a container of at least 1 litre capacity.
Do not lift the lever during the descaling process.
Press both buttons simultaneously for 3 seconds to start descaling.
The machine is ready for descaling.
Press any button to start the descaling cycle.
Refill the water tank with the descaling solution.
Place a container of at least 1 litre capacity.
Press any button to start the cycle until the tank is empty.
Follow the rinse instructions to complete the process.
Rinse thoroughly to remove any residual descaler.
Empty, rinse, and fill the water tank with drinking water.
Place a container of at least 1 litre capacity.
Press the button and wait for the water tank to empty.
Press both buttons simultaneously for 3 seconds to exit.
Switch the machine off.
Empty and clean the water tank, capsule container, and drip tray.
Switch the machine off.
Remove the water tank.
Open the lever.
Press and hold the espresso button, then switch on the machine.
The buttons will blink alternatively.
Switch the machine off; it will remain blocked for 10 min.
Check power, plug, voltage, fuse. Call Nespresso Club if issues persist.
Check water tank, descale if needed, or perform first use.
Check flow speed, descale if necessary.
Preheat cup, descale if necessary.
Position capsule correctly. Call Nespresso Club for leaks.
Send appliance for repair or call Nespresso Club.
Call Nespresso Club for issues with water-only output.
Technical specifications including voltage, wattage, and pressure.
Information on appliance disposal and recycling of valuable materials.
Nespresso's commitment to sustainability and responsible sourcing.
Nespresso warrants the product against defects for 2 years.
Excludes defects from misuse, accidents, or non-genuine capsules.
Nespresso contact details for Canada and USA.
Nespresso contact details for Argentina, Brazil, and Chile.
Nespresso contact details for various European countries.
Nespresso contact details for various Asian countries.
Nespresso contact details for Egypt, Morocco, Bahrain, Kuwait, Lebanon, Saudi Arabia, UAE, South Africa.
Nespresso contact details for Guadeloupe, Mauritius, Reunion.
To Next Page
