Do you have a question about the Nespresso ESSENZA D90 and is the answer not in the manual?
Brand | Nespresso |
---|---|
Model | ESSENZA D90 |
Category | Coffee Maker |
Language | English |
Remove protective film from the appliance before first use.
Fill the water tank with fresh water for initial operation.
Position a container under the coffee outlet before operation.
Plug the appliance into mains and switch it on to begin.
Allow water to run through the system to prepare it.
Fill the water tank with fresh water before the first coffee of the day.
Turn on the appliance and wait for it to heat up.
The appliance is ready when the status indicator shows readiness.
Preheat your cup with hot water before brewing.
Insert a Nespresso capsule into the designated slot.
Start the brewing process for Espresso or Lungo.
Eject the used capsule into the capsule container after brewing.
Turn off the appliance after the last coffee.
Empty the capsule container and drip tray.
Rinse and empty the water tank for daily maintenance.
Clean the machine with a damp cloth and mild cleaning agent.
Empty the system after long non-use or for frost protection.
Follow preparation steps before starting the descaling process.
Run the descaling solution through the machine as instructed.
Rinse the machine thoroughly with fresh water after descaling.
Check power supply if there is no indication on the machine.
Address issues like empty water tank or need for venting.
Preheat cup or descale if coffee temperature is insufficient.
Ensure correct capsule positioning or contact support if leaking persists.
Contact support or send for repair if indicator blinks irregularly.
Immediately remove plug from power socket in emergencies.
Follow rules regarding appliance use, cleaning, and children's supervision.
Ensure correct voltage and protective earth connection for safe operation.
Avoid improper use, keep away from heat, and do not tamper with the machine.
Recycle valuable materials and dispose of waste responsibly.