What to do if my Nespresso Essenza FS is not working?
If your Nespresso Coffee Maker isn't working, verify that the mains cable and the On/Off switch are functional. Check if the pump is working by pressing the coffee button and ensure the coffee buttons themselves are functional. Also, inspect the pump's fine wire fuse (128°C) and the thermoblock’s fine wire fuse (167°C) to see if they are defective.
How to fix a leaking water tank on Nespresso Coffee Maker?
If the water tank of your Nespresso Coffee Maker is leaking, you should replace the water tank.
What to do if the capsule is not correctly ejected from my Nespresso Essenza FS?
If the capsule is not being correctly ejected from your Nespresso Coffee Maker, replace the CBU.
How to repair a damaged mains cable on Nespresso Coffee Maker?
If the mains cable of your Nespresso Coffee Maker is damaged, replace it.
What to do if parts of the housing are broken on my Nespresso Coffee Maker?
If parts of the housing of your Nespresso Coffee Maker are broken or damaged, replace the parts if necessary.
Lists and illustrates the main components of the coffee machine.
Details information found on the machine's rating plate and serial number codification.
Illustrates the flow path of water through the coffee machine's internal system.
Presents detailed technical data including voltage, power, capacities, and performance.
Step-by-step instructions for preparing the coffee machine for use.
Procedure to ensure proper water circulation when the system is empty.
Guide on how to operate the machine to brew coffee.
Instructions for customizing the amount of coffee dispensed.
Procedure to restore the machine to its original factory configuration.
Method for draining residual water for maintenance or transport.
Explanation of LED signals and button states indicating machine status.
Checklist for inspecting the machine for visible damage upon receipt.
Fundamental steps for taking the coffee machine apart for servicing.
Detailed guide for replacing the thermoblock and NTC temperature sensor.
Instructions for replacing the flow meter and the main power switch.
Step-by-step procedure to replace the water pump.
Procedure for replacing the main electronic board and button interfaces.
Instructions for replacing the compact brewing unit assembly.
Schematic of the electronic control board wiring for European models.
Schematic of the electronic control board wiring for USA models.
Schematic of the electronic control board wiring for Japan models.
First part of the descaling process, including preparation.
Second part of the descaling process, including rinsing and completion.
Procedure for measuring the machine's water flow rate.
Initial steps for diagnosing leaks and checking pump pressure.
Completion of leak and pump pressure diagnosis.
Method for measuring the temperature of the dispensed coffee.
Instructions for routine cleaning and maintenance of the coffee machine.
Lists specialized tools and accessories required for machine repair.
Comprehensive list of replaceable parts for the EF 473 model.
Continuation of the spare parts list for the EF 473 model.
Comprehensive list of replaceable parts for the EF 474 model.
Continuation of the spare parts list for the EF 474 model.
General| Brand | Nespresso |
|---|---|
| Model | Essenza FS |
| Pressure | 19 bar |
| Material | Plastic |
| Heat Up Time | 25 seconds |
| Compatible Pods | Nespresso OriginalLine capsules |
| Automatic Shut Off | Yes |
| Water Tank Capacity | 0.7 L |
| Power | 1260 W |
| Color | Black |
| Cup Size Options | Espresso, Lungo |
| Auto-Off | 9 minutes |
To Next Page