Nespresso Essenza FS User Manual

9
Operation
Service Manual EF 473 / EF 474 enVersion 1.0
Fill water system
If the coffee machine cannot pump water
although there is water in the tank, the water
circuit may be empty.
Procedure to fill water system:
1. Perform steps 1 to 5 for preparation (see
page 8).
2. Open closing handle in vertical position.
3. Press button "large cup".
4. Press and hold closing handle to rear end
position.
5. Observe capsule inlet for appearing
water.
6. Press down closing handle immediately
when first droplets are visible.
7. Press button "large cup" again to stop
water flow.
3
2
6
7
45

Nespresso Essenza FS Specifications

General

Brand	Nespresso
Model	Essenza FS
Category	Coffee Maker
Language	English