What to do if the capsule is not correctly ejected from my Nespresso Essenza EF 470?
To resolve the issue of a capsule not being correctly ejected from your Nespresso Coffee Maker, replace the CBU.
What to do if parts of housing broken or damaged on Nespresso Essenza EF 470?
If parts of the housing of your Nespresso Coffee Maker are broken or damaged, replace the parts if necessary.
General| Brand | Nespresso |
|---|---|
| Pressure | 19 bar |
| Model | Essenza |
| Water Tank Capacity | 0.7 L |
| Power | 1260 W |
Step-by-step instructions for brewing coffee using a capsule.
Steps to check for visible damage and mechanical issues upon receiving the machine.
Detailed guide for removing and replacing the thermoblock component.
Step-by-step procedure for replacing the NTC temperature sensor.
Instructions for removing and installing a new pump unit.
Procedure for replacing the main electronic control board and button prints.
Detailed steps for removing and replacing the compact brewing unit.
First part of the descaling process, including preparation and initial fluid circulation.
Second part of the descaling process, including repeating cycles and rinsing.
To Next Page