ƦơƣƧƜƝƙƦƞƨƧƝƦơƥƙƢƫƞͺ΅ͺͶΉͺͼ΅ʹ;ͶͲͷ΅Ήͱͼ͵ΆͷͱͷʹͶΆͼͻΆͻ
ͶͺͶͲͺͻͼͺͰͷͻͼͲͺͷ͵Ͷ·ʹͻ͵ͽͼͲͲ
ͺͶΉͷͺ΅ͶͰͼͷͰͼΆ͵ΈͽΈʹͷʹͽͲʹ;;ͽͼͼΆͻΉͼͶͼͲͻʹͲͶͺͼͷͻͼͲDMJHOPUFOU
͵ΉͲʹ;ͷͰͶͲͼʹͷʹͽͻͺͻͻͶ͵
Ͳ͵ͲͽͷͶ͵ͺͲͼ͵ͷͲʹ;ͻͼͷͲͼͻΉ
ͼͶͼͲͻʹͲ͵ΉͻͼͷʹͲͲʹ;Ͳ͵Ͳ
ʹͲʹ;ͷͰͶͲͼʹͷʹͽͺͱ
ʹ͵ΈͲͼʹ;ͶͲͷͽͲͰͲͼ
ͺͰͲͶͼͷͻͼͲͻͼΉͷͷͻͷͲ
ͲͷͲʹͼͺ
͵ͷͲͼͺͱͺͽͺͲͼΆͳͳͲ
ͻͼΆͼʹͻͽ͵ͽ
ͻͼΆͼʹͽͽͻͼͺͳͻͼͲʹ;
ͰͶͲͼͲͽͺͰͲͳͼʹͷʹͽͻͺͻͻͲ͵Ͳͽͷ
ͼͽͻͼͲͼʹͷʹͽͺͲͻͼͲͰͷͲͲͰ͵Ͷ΄Ͷ
ͷͲʹͼͺ΅ͶͲͷͽͼͺͱ͵ΉͼͺͰͷͲΉͷ΅Ϳ
ͷͻͼͺʹ
ͺͷΆ΄Ͷ΅ͻͿͺͷͲ͵ͻΉͶΉͼͲ
ͺͲͼʹͽͷͲͶͲͼͲͽͻͼͲͼͺ΅
͵ΉͲͱ͵ͷͲΉʹͻͽ͵΅ʹͷͼͳͷͺ͵Ή
Ͳͻ͵Άͱͷͷ΅Ϳʹͻͽ͵
ͺͺͶͶͲͺͷͲ΄Ͷ΅
EN
RU
13
NEVER LIFT THE LEVER during operation and refer to the important safeguards to avoid possible harm when operating the
appliance.
During heat up, you can press either coffee button while blinking. The coffee will then flow automatically when the machine is ready.
Press the Espresso (40 ml) or the Lungo (110 ml) button to start.
Preparation will stop automatically. To stop the coffee flow or top
up your coffee, press again.
Turn the machine on and wait for it to be in ready
mode (steady lights). Fill the water tank with fresh
potable water and insert the capsule.
Place a cup under the coffee outlet.
Press and hold the Espresso or Lungo button.
Release button once the desired volume is served.
LED will blink fast 3 times to confirm new setting.
Water volume level is now stored.
Remove the cup. Lift and close the lever to eject the capsule
into the used capsule container.
Programming the Water Volume /
UM_NESPRESSO_ESSENZA_MINI_BA.indb 13 31.10.17 15:40