STEP 1 STEP 2 STEP 3
STEP 4
STEP 7
STEP 5
STEP 8
STEP 6
STEP 9
4
E V O L U O
Duration: 20 minutes
Press and hold button until you
see steady light turn off first, and
then start blinking quickly. It may
take approximately 7 seconds
before light starts to blink.
Turn lever to the left to lock the
lever, then turn lever back to the
front to unlock the lever.
Place 20 oz. receptacle
underneath spout. Press and
release button once to begin
descaling. Light will
continuously blink throughout
the process. Machine will
dispense solution intermittently.
With machine plugged in, empty
the capsule container and drip
tray and place back onto the
machine.
Fill water tank with 1 packet of
descaling solution and 1/2 tankof
water.
Once the solution has finished
running through, machine should
be silent. Discard the solution
and return the empty receptacle
underneath the coffee spout.
Leave the lever in the unlocked
position. Press and release button
once and wait for steady light.
Press and hold the button until
the light turns off and then starts
blinking quickly again. Steps 5
and 6 must be completed
within 45 seconds.
Lock the lever. The light should
still be blinking fast. This is an
indication that you have entered
descaling mode. If not, start over
from Step 3.
To Next Page
Loading...
Need help?
General
