STEP 10 STEP 11 STEP 12
STEP 13 STEP 14 STEP 15
5
E V O L U O
Rinse water tank. Refill with ⅔
fresh water and place back on
the machine. Press and release
button to start the rinsing
process.
Once the water tank is empty,
press and hold the button until
the blinking light becomes
steady. This may take
approximately 7 seconds.
Refll the water tank and place it
back onto the machine.
The machine will stop making
noise once the water tank is
completely empty. Discard the
water from the receptacle.
Empty and rinse the capsule
container and drip tray and
reinsert.
Wipe down the machine with a
damp cloth. Let the machine rest
for 10 minutes. The machine is
now ready for use.
To Previous Page
Loading...
