2
1
EN
KR
12
The cup support has
4 positions and can be
temporarily removed to
accommodate various
cup sizes.
The power cable can be adjusted under the machine. Insert the
remaining cable in the guide on the le or on the right side socket,
depending on the position chosen for the water tank.
Ensure machine is in the upright position.
To place the cup support, slide cup support straight
into the holes and gently push down until the hooks
are well in place.To remove it, gently li straight up
and then pull the cup support out.
CUP SUPPORT /
POWER CABLE /
CAUTION: Be careful
when removing the cup support
since it may contain warm liquid.
Make sure the cup support is
properly placed before puing
the cup.
1
1
2
MACHINE HANDLING /
To Next Page
Loading...
Need help?
General
