Nespresso GCB2 - RESET TO FACTORY SETTINGS

3 sec.
3 x
3 x
/
3 sec.
3 sec.
EN
KR
20
󺩤󼔔󾖴󼬋󽋇󾖴󻺓󼖄󺦁󼒫󻗋󾖴󼩷󺮟󽏃
󼚀󼐃󻕷󻧳󻛫󾖴󼊳󻔇󻗋󾖴󺽻󻕛󾖴󽀨󻨳󾖴󺮟󻀔󼒳󾖴󻺏󼹌󽋘󻀷󻁓󽋋󻧷󾖴󺽳󻛣󻟣󻊃󼀓󼱯󼓫󻜰󻆿󻧷
󺽳󻛣󻟣󻮳󼐟󺮟󻧷󾖴󺽳󻛣󻟣󺩤󼔔󾖴󼬋󽋇󾖴󻺓󼖄󺦁󼒫󻗋󾖴󼩷󺮟󽏃󺥯󾖴󻆘󻀷󻁓
󻕷󻧳󻛫󾖴󼊳󻔇󾖴󻦘󽌔󼒫󻗋󼩷󺥳󾖴󺽻󻕛󾖴󻞧󼁏󼓇󾖴󼕳󼐿󼒳󾖴󺷄󻀷󻁓
󻕷󻧳󻛫󾖴󼊳󻔇󾖴󻦘󽌔󼒫󻗋󾖴󺽻󻕛󾖴󺮟󻀔󼒳󾖴󻺏󼹌󽋘󻀷󻁓
󻺧󻧷󾖴󺽳󻛣󻟣󺩤󼔔󾖴󼬋󽋇󾖴󻺓󼖄󺦁󼒫󻗋󾖴󼩷󺮟󽏃󺥯󾖴󻺏󼹌
󻆘󻀷󻁓
󺩤󼔔󾖴󼬋󽋇󾖴󻺓󼖄󺦁󼒫󻗋󾖴󼩷󺮟󽏃󻠗󻉋󼌿󾖴󻉓󼌣󺥯󻖓󻟣󻧳󽀫󺩫
󻕷󻧳󻛫󾖴󼊳󻔇󻦘󽌔󼒫󻗋󾖴󻅈󼁋󼩷󺥳󾖴󺽳󻛴󻀷󻁓󼙫󽏘󻸸󾖴󻫷󻯊󼓣
󼲋󼜯󻟣󾖴󽀨󻨳󾖴󺮟󻀔󾖴󻠗󻉋󼌿󾖴󼜳󼓴󾖴󻆇󼌷󼀤󻀷󻁓
󻧳󽀫󼒳󾖴󺽻󻕛󾖴󽋣󻁨󾖴󺮟󻀔󼒳󾖴󻺏󼹌󽋘󻀷󻁓
󼙫󽏘󻸸󾖴󻫷󻯊󼓣󼩷󻅈󼊷󻧷󾖴󺯋󻯐󼓣󻟟󾖴󼔛󻺓󼖄󻆗󼒳󾖴󽏄󼓧
󽋋󾖴󽐳󻁓󼁋󾖴󺻨󻸸󾖴󻫷󻯊󼓣󾖴󼲋󼝀󻀷󻁓󼓣󼖋󾖴󻞧󼁏󼒯󾖴󻁓󼁋󾖴󼱓󽊫
󼬃󼬋󾖴󼙯󻮳󺥯󾖴󻆇󼌷󼀤󻀷󻁓
󼚀󼐃󻫳󼓣󺸣󼌿󾖴󺮟󻀔󼒳󾖴󻺏󼹌󽋇󼜯󾖴󼊹󼒫󻟣󾖴󻞧󼁏󼒯󾖴󻁓󼁋󾖴󼱓󽊫󾖴󼬃󼬋󾖴󼙯󻮳󾖴󻁗󺨳󻗋󾖴󻄻󼊳
󺦀󻀷󻁓󼙫󽏘󻸸󾖴󻫷󻯊󼓣󾖴󻝓󼩷󻜷󻁓󻧷󾖴󺯋󻯐󼓣󻟟󺩤󼔔󾖴󼬋󽋇󾖴󻺓󼖄󺦁󼒫󻗋󾖴󼩷󺮟󽏃󺮟󻀔󼓳󼒳
󼊻󻖓󼙼󻀷󻁓
󼚀󼐃󻧳󽀫󺩫󾖴󻕷󻧳󻛫󾖴󼊳󻔇󾖴󻦘󽌔󼒫󻗋󾖴󻅈󼁋󼌿󼩷󺥳󾖴󺽳󻛣󻟣󾖴󽀨󻨳󾖴󺮟󻀔󼌿󻺋󾖴󺸇󺥯󼁓󾖴󻾇
󼓷󼀤󻀷󻁓󺻨󻸸󾖴󻫷󻯊󼓣󾖴󼲋󼜯󻟣󾖴󻞧󼁏󼒯󾖴󻁓󼁋󾖴󼱓󽊫󻛫󾖴󼬃󼬋󽋏󾖴󼙯󻮳󺥯󾖴󻆇󼌷󼀤󻀷󻁓
󼦧󺩏󻞧󼁏󼓇󾖴󻫷󻯊󼓣󾖴󼱓󽊫󾖴󼬃󼬋󾖴󻧳󽀫󼒳󾖴󺽻󻕛󾖴󽏄󼓧
󽋇󺮟󼕳󼩷󻜷󻁓󻧷󾖴󺯋󻯐󼓴󻀷󻁓
RESET TO FACTORY SETTINGS /
NOTE: Choose Special Function by pressing the lever down: 1 time for
"Descaling". 2 times for "Emptying the system". 3 times for "Reset to factory
seings".
NOTE: Choose function within 2 minutes or else the machine will go
back to Ready mode. ORANGE light will blink 3 times every 2 seconds,
indicating the “Factory reset” function.
NOTE: It is possible at any time to exit the Special Functions menu
by pushing the buon and pressing the lever down at the same time for
3 seconds. GREEN steady light indicates the machine is ready.
NOTE: the machine will blink 3 times every
2 seconds until the buon will be pressed.
Turn the machine "OFF" by pushing the lever
down for 3 seconds.
Choose function by pressing the lever down:
- 3 times for "Reset to factory seings"
To enter "Factory seings" mode, push the
buon and the lever down at the same time for
3 seconds. ORANGE steady light indicates entry
into the Special Functions menu.
Push the buon to confirm. ORANGE light will
blink 3 times in 3 seconds to confirm reset
is done and then go to steady GREEN. The
machine is now ready to use.
1
3
2
4