Nespresso KRUPS Vertuo - Emptying the System; Draining the Machine

1
2
3
2
1
UK
EN
EMPTYING THE SYSTEM
BEFORE A PERIOD OF NONUSE, FOR FROST PROTECTION OR BEFORE A REPAIR
5. Reclose the head and turn
lever left until “LOCKED”
position.
6. Push and hold the button
while replugging the power
cord and then release the
button.
1. Empty the water tank and
put it in place.
2. Place a container under the
coee outlet.
4. Open the machine head and
let the used capsule be ejected.
7. Machine turns “OFF”
automatically when machine
is empty.
NOTE: the machine remains blocked
for 10 minutes after emptying!
CAUTION: caution should be exercised when plugging in the coee machine with the button
pressed as the machine evacuates remaining liquids using heat. Small quantities of steam may emit from
the machine.
3. Unplug the power cord.
13
11066_UM_VERTUO_KRUPS_NB.indd 13 16.08.17 08:48