Nespresso KRUPS Vertuo User Manual

1
2
7 sec.
2
1
0.8 l
EN
10. Place a container
(minimum volume: 0.8 l) under
the coee outlet.
11. To start descaling, lock the
machine by turning the lever left and
push the button. The machine will
stop automatically when complete.
12. Empty, rinse and clean
the water tank and cup
support thoroughly.
15. To exit the descaling mode,
hold the button for at least
7 seconds.
16. The button will stop
blinking rapidly and become
steady.
17. Descaling is completed. Allow
the machine to dry for 10 minutes
before using it.
18. The machine is now ready for use.
13. Fill the water tank with fresh
drinking water and put it back in
place on the machine.
14. When ready, push the button
to rinse the machine. The machine
will stop automatically when
complete. The procedure can be
stopped at any time by pushing
the button.
This machine is equipped with a descaling alert: the light will blink alternately 3 times, then become
steady. Machine can only be operated to make coee a few more times once the alert appears before
descaling becomes mandatory.
NOTE: if the machine is completely scaled, the descaling program may not function and the machine
will stop and blink. Pause the program in this case for several minutes, allowing the descaling agent to
penetrate the scale build-up, then push the button again to restart the descaling.
DESCALING
16
11066_UM_VERTUO_KRUPS_NB.indd 16 16.08.17 08:48

Nespresso KRUPS Vertuo Specifications

General

Brand	Nespresso
Model	Vertuo
Manufacturer	KRUPS
Water Tank Capacity	1.2 liters
Used Capsule Container Capacity	10
Automatic Shut Off	Yes
Voltage	120 V
Special Feature	Centrifusion technology
Included Components	Nespresso Vertuo machine, welcome set of Nespresso capsules