Ness NanoStation Loco M5 User Manual

Page 3
3. Open a web browser on your computer and navigate to http://192.168.1.20
When prompt to do so, enter the username and password to login.
Default login is:
Username: ubnt
Password: ubnt
4. Once logged in click on the ‘Wireless’ tab.
5. Change the Wireless Mode to be ‘Access Point’, and tick the WDS checkbox.
6. Set a unique SSID for your wireless bridge.
In my example I am using ubnt as the name, but recommend to use something more
unique.

Ness NanoStation Loco M5 Specifications

General

Brand	Ness
Model	NanoStation Loco M5
Category	Network Router
Language	English