Ness NanoStation Loco M5 User Manual

Page 5
13. Set the network mode to be ‘Bridge’.
14. Set a Static IP address for this NanoStation like below:
15. Click on the ‘Change’ button down the bottom of the page to save the values.
16. Once you click on ‘Change’ button, click on the first tab and long the top.
(no need to click Apply just yet)
17. Enable (tick) the airMAX checkbox and then click change.

Ness NanoStation Loco M5 Specifications

General

Brand	Ness
Model	NanoStation Loco M5
Category	Network Router
Language	English