Ness SecurityGuard III User Manual

8
Radio Panic Button (RPB) Optional
OPERATION
Press the red Panic button to sound the Panic alarm.
(As programmed by your installer.)
BATTERY REPLACEMENT
Carefully lift off the Panic Button's cover by unclip-
ping at the bottom using a flat-bladed screwdriver or
blunt knife.
Insert a new CR2477 3V Lithium battery and then
test the sensor.
The new battery must be inserted in the battery clip
with the positive (+) side up.
Open here. Insert the new
battery. CR2477
3V Lithium
battery.
Remove
cover.
Posit ive (+)
side up.
Radio Door Bell (RDB)
OPERATION
Press the Door Bell button to sound the door chime at
the SECURITYGUARD III main unit.
BATTERY REPLACEMENT
Carefully lift off the RDB Door Bell unit's cover by
unclipping at the bottom using a flat-bladed screw-
driver or blunt knife.
Insert a new CR2032 3V Lithium battery and then
test the sensor.
The new battery must be inserted in the battery clip
with the positive (+) side up.
Open here. Insert the new
battery. CR2032
3V Lithium
battery.
Remove
cover.
Posit ive (+)
side up.
* Example device
number
* Example device
number

Ness SecurityGuard III Specifications

General

Brand	Ness
Model	SecurityGuard III
Category	Security System
Language	English