nest Learning thermostat - On the Stand

14
Installing it on the stand
7. Install the Nest Stand
Attach the thermostat base to the stand
according to the instructions that came
with it. Connect the power cable to the
base and plug it into a wall socket.
Stand-mounted thermostats should be
placed on a table or shelf 0.75–1 m above
the floor and no further than 1 m from
the edge.
IMPORTANT: Make sure that you
install the Heat Link before
you install the Nest Thermostat.
NOTE: The Nest Stand is sold separately
and comes with its own installation
instructions. Go to nest.com/eu/stand
for more information.