Netafim NETAFLEX 3G - Hydraulic Condition Checklist; Recording Reference Data

30 NETAFLEX™ 3G USER MANUAL
NETAFLEX 3G HYDRAULIC CONDITION CHECKLIST
Testing date
Main line pressure
bar / PSI
Main line flow
m
3
/h / GPM
Q suction
l/h / GPM
Source water EC Source water pH
Dripperline water EC Dripperline water pH
Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6
Reference data
Serial number
Project name
Technician name
Installation date
Notes
Fill-in the table below once a month in order to assist
the technician in case of booster pump or dosing channel
malfunction (The Reference data row is filled-in by the
tecnician upon commissioning) .
Check main line pressure gauges, main line flow meter
and all the hydraulic conditions in the following table
(see the Installation Manual at https://www.netafim.com/en/digital-farming/netbeat/Fertigation/netaflex/).
Dosing channel Q suction: If fertilizer meters are installed use the data in the controller. Otherwize use the
visual flow meter (Rotameter) data.