node1_siteA::> metrocluster node show -fields configuration-state
dr-group-id cluster node configuration-state
----------- ---------------------- --------------
-------------------
1 node1_siteA node1mcc-001 configured
1 node1_siteA node1mcc-002 configured
1 node1_siteB node1mcc-003 configured
1 node1_siteB node1mcc-004 configured
4 entries were displayed.
9.
Verify that the expected volumes are present for each controller:
vol show -node node-name
10. If storage encryption is enabled, you must restore functionality.
11.
If you disabled automatic takeover on reboot, enable it from the healthy controller:
storage failover
modify -node replacement-node-name -onreboot true
Step 6: Restore Storage and Volume Encryption functionality
If you have storage encryption enabled, use the appropriate procedure.
792
To Next Page
