NetApp AFF - Page 21

d.
Return to admin mode:
set -priv admin
e. You can safely shut down the controller.
2.
If the
Key Manager type displays external and the Restored column displays anything other than
yes:
a.
Enter the onboard security key-manager sync command:
security key-manager external
sync
If the command fails, contact NetApp Support.
mysupport.netapp.com
b.
Verify that the
Restored column equals yes for all authentication keys: security key-
manager key-query
c. You can safely shut down the controller.
3.
If the
Key Manager type displays onboard and the Restored column displays anything other than
yes:
a.
Enter the onboard security key-manager sync command:
security key-manager onboard
sync
Enter the customer’s onboard key management passphrase at the prompt. If the passphrase
cannot be provided, contact NetApp Support.
mysupport.netapp.com
b.
Verify the
Restored column shows yes for all authentication keys: security key-manager
key-query
c.
Verify that the
Key Manager type shows onboard, and then manually back up the OKM
information.
d.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv advanced
e.
Enter the command to display the key management backup information:
security key-
manager onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You’ll need it in
disaster scenarios where you might need to manually recover OKM.
g.
Return to admin mode:
set -priv admin
h. You can safely shut down the controller.
Shut down the controller - AFF C190
After completing the NVE or NSE tasks, you need to complete the shutdown of the
impaired controller.
After completing the NVE or NSE tasks, you need to complete the shutdown of the impaired controller.
Steps
a. Take the impaired controller to the LOADER prompt:
19