Prepare for installation Install hardware Cable storage
Complete system setup
and configuration
1 2 3 4
AFF A220 or
FAS2700 Systems
Installation and Setup Instructions
Prepare for installation | Stage 1
You provide
In the box
Pre-setup
1. Click mysupport.netapp.com and then create/log in to your account, download and install Active IQ Config Advisor,
and register your system.
2. Unpack all boxes and inventory contents. For more cable information and part numbers, see the Hardware Universe.
3. Go to the AFF and FAS System Documentation Center and click AFF A220 and FAS2700 systems, and then Installation and Setup:
- Download and complete the Cluster Configuration Worksheet.
- Watch the videos listed under Setup videos.
.
Storage cables
mini-SAS HD to mini-SAS HD cables
Part number X66030A (112-00435) or X66031A (112-00436)
or X66032A (112-00437) or X66033A (112-00438)
Additional cables
Power cables
Ethernet cables
micro USB console cable
Screwdriver
Phillips #2
Laptop or console
With USB/serial connect or direct
switch connect and access to a Web browser
to configure your storage system
Rack space
2U per chassis
Additional network cables
For connecting your storage system to your
network switch and laptop or console.
Cluster Interconnect cables
Part number X6566B-05-R6 (112-00297)
or X6566B-2-R6 (112-00299)
10 GbE network cables
(order dependent)
Part number X6566B-2-R6 (112-00299) or
X6566B-3-R6 (112-00300) or X6566B-5-R6 (112-00301)
Optical network cables (order dependent)
Part number X6553-R6 (112-00188) or
X6554-R6 (112-00189) or X6536-R6 (112-00090)
Data and cluster Interconnect cables
CAT6 RJ-45 cables
Part number X6585-R6 (112-00291)
or X6562-R6 (112-00196)
A
B
1
2
Unified configuration (order dependent)
A
B
1
2
Ethernet configuration (order dependent)
215-13080_E0
To Next Page
Need help?
General
