Need help?Do you have a question about the NetApp AFF A800 and is the answer not in the manual?
General| Model | AFF A800 |
|---|---|
| Category | Storage |
| Form Factor | Rack-mountable |
| Operating System | ONTAP |
| Processor | Intel Xeon Scalable Processors |
| Memory | up to 6 TB |
| Power Supply | Dual redundant power supplies |
| Non-Disruptive Operations | Yes |
| NVMe Support | Yes |
| Protocols Supported | FC, iSCSI, NFS |
| Data Reduction | Compression, Deduplication, Compaction |
| High Availability | Yes |
| Encryption | At-rest and in-flight |
| Drive Type | SSD |
| Data Protection | SnapMirror, SnapVault, Snapshot, mirroring, and replication |
| Management Interface | OnCommand System Manager |
| Storage Type | All-Flash Array |
Choose between quick, video, or detailed installation steps.
Covers racking, cabling, and initial hardware setup.
Finalize system setup and network configuration.
Replace boot media and verify encryption status.
Steps for shutting down nodes and checking HA configuration.
Detailed process for removing and installing controller modules.
Set system time and verify HA state after replacement.
Procedures for replacing DIMMs and NVDIMMs.
Procedures for replacing PCIe cards and fan modules.
Instructions for replacing power supplies and RTC batteries.
To Next Page
