NetApp XCP - Page 5

XCP issue Solution
xcp: batch 1: ERROR: [Errno 13]
Permission denied:
As a non-root user, you do not have the correct
permissions to access the file system. Check if you
can access the file system and perform read write
operations.
mxcp: ERROR: OSMounter 'file:///t/
10.234.115.215_src_vol/DIR': [Errno 2]
No such file or directory
The path /t/10.234.115.215_src_vol/ DIR is
not mounted on the Linux file system. Check if the
path exists.
ERROR: run sync {-id:
'xcp_index_1624263869.3734858'}: sync
not yet available for hdfs/ posix/s3fs
sources and targets -workaround is copy
with a match filter for recent mods
The sync command is not supported in XCP for the
POSIX and HDFS connectors.
The xcp verify command fails with different mod
time
You can identify the file and manually copy the file to
the destination.
Non dir object copy/sync can not be
resumed; try copy again.
For more details please refer XCP user
guide.
Because you cannot resume a single file, it is
recommended to run the
xcp copy command again
for the file.
Any change in the file leads to a complete copy of the
file. As a result, performance is not affected.
Non dir object can not be synced; try
copy again.
For more details please refer XCP user
guide.
Because you cannot sync a single file, it is
recommended to run the
xcp copy command again
for the file.
Any change in the file leads to a complete copy of the
file. As a result, performance is not affected.
xcp: ERROR: batch 4: Could not connect
to node:
Verify that the node given in the —nodes parameter is
reachable. Try connecting by using Secure Shell
(SSH) from the master node
[Error 13] permission denied
Check if you have permission to write on the
destination volume.
xcp: ERROR: batch 2: child process
failed (exit code -6): recv <type
'exceptions.EOFError'>:
Increase your system memory and rerun the test.
xcp:ERROR: invalid path
'IP:/users009/user1/2022-07-
01_04:36:52_1489367
If there is one or more colons in the NFS server share
path name, use a double colon (::) instead of a single
colon (:) to separate the NFS server IP and NFS
server share path.
3