Netatmo Weather Station User Manual

Tips and troubleshooting
Tips and troubleshooting
How does it all works?
The outdoor module (the small one) wirelessly sends its measurements to the indoor module (the big one)
using radio signal. Using your Wi-Fi access point, the indoor module then sends both its own measurements
and the outdoor module's measurements to your internet Netatmo personal account.
When you launch the Netatmo App on your iPhone, those measurements are downloaded from your Netatmo
personal account and displayed by the App.
When configuring with an iPhone or iPad
When you configure your Netatmo Weather Station with an iPhone, the weather station is connected to the
wall adapter using its provided USB cable (USB to micro-USB) and the iPhone is connected to the weather
station using its own iPhone cable (lightning or 30-pin connector).
When configuring with a computer (Mac/Windows/Linux)
When you configure your Netatmo Weather Station with a computer, the weather station is not connected to
the wall adapter. The weather station is only connected to the computer using its provided USB cable (USB to
micro-USB). No additional cable is needed.
How does it all works?
How does it all works?
Configuration setup
Configuration setup

Netatmo Weather Station Specifications

General

Humidity Range	0% to 100%
CO2 Measurement Range	0 to 5000 ppm
Connectivity	Wi-Fi 802.11 b/g/n (2.4 GHz)
Indoor Sound Meter	Yes
Battery Life (Outdoor Module)	Up to 1 year
App Support	Netatmo Weather App
Weather Forecast	7-day forecast
Indoor Temperature Range	0°C to 50°C
Outdoor Temperature Range	-40°C to 65°C
Power Supply	Indoor: USB power adapter, Outdoor: 2 AAA batteries
Compatibility	iOS, Android
Indoor Module Dimensions	45 x 45 x 155 mm
Data Storage	Cloud storage
Alerts	Customizable alerts for temperature, humidity, CO2 levels