3
BEFORE YOU BEGIN
Ensure that you have the following information
from your service provider:
- How your Internet service will physically connect to your gateway
- The Settings specic to your type of service.
There are three primary ways to connect your
gateway to the Internet service:
Mobile Broadband
This uses the cellular network to connect to the Internet,
just like a smartphone does. Requires a valid carrier
SIM card be inserted in the gateway to work.
Ethernet WAN
This is the most common access type in Australia and New Zealand
and covers xed line technologies such as nbn™ FTTP, HFC, FTTC
as well as UFB Fixed Wireless and Sky Muster™ satellite services.
This type of Internet service uses the red WAN port on the
back of the gateway to connect to the dedicated connection
box installed by your access network provider.
ADSL or VDSL
These access types are provided by nbn™ FTTB, FTTN
or ADSL/VDSL over a traditional telephone line.
This connection uses the grey DSL port on the back of the gateway.
To Next Page
Loading...
Need help?
General
