Need help?Do you have a question about the NetComm NF18ACV and is the answer not in the manual?
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 1600 Mbit/s |
| Networking standards | IEEE 802.11ac, IEEE 802.11d, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| USB port | - |
| RJ-11 ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Product type | Tabletop router |
| Product color | White |
| Output current | 2 A |
| Output voltage | 12 V |
| Power source type | AC |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 95 % |
Weight and Dimensions| Depth | 28 mm |
|---|---|
| Width | 216 mm |
| Height | 174 mm |
| Weight | 558 g |
Connect the device using DSL lines, including phone filters and VoIP connections.
Connect the device via Ethernet WAN to an upstream gateway device.
Access the gateway's web interface using a browser and default credentials.
Utilize the setup wizard for initial device setup and internet connection.
Configure ADSL PPPoE connection with VPI, VCI, username, and password.
To Next Page
