6
1. Connect a straight-through Ethernet cable to the blue
WAN
port on the
back of the NF18ACV and then connect the other end to your upstream
gateway device, for example an FTTP gateway or HFC cable modem.
2. Connect the supplied RJ45
Ethernet
cable from one of the yellow
Ethernet ports (1-4) on the back of the NF18ACV to your computer.
3. Connect the included power adapter to the
Power
jack of the NF18ACV
and then plug it into an available wall socket. Press the
ON/OFF
button
to power the router on. The Power light illuminates in red. When the
NF18ACV has nished booting up, the Power light turns green.
INSTALLING THE DEVICE VIA
ETHERNET CONNECTIONS
To Next Page
Loading...
